Smart Ideas: Revisited

How to Clean Glass Pipes for Marijuana Beginners

Most of us have learned the hard way from pipes that any failure to clean them will result in filthiness and it can’t be used for any consumable water. If you leave your clothes dirty for months, utensils or even your stove, it will be unsightly and unhygienic. For marijuana smokers, they need to mind about cleaning their glass pipes as they do to other important things. Thus if you leave your glass pipe without cleaning, it will result in ash caking and dirty resins that can be carcinogenic when inhaled. Not only that but also it will also ruin and degrade your glass pipe. When you smoke from a clean pipe, you will enjoy the test that you desired from the product.

If you are using the best and economical cheap glass pipes, it will be easy to clean. The best method is always the easiest and fastest. Check the following ways of cleaning your cheap glass pipes. You should give this method a try.

There is the boiling water cleaning way that requires the clearing of all debris from the pipe bowl. Remove every form of debris by scooping them with a paper towel and upside the bowl down. You can then put the cheap glass pipes in a pot of boiling water or pour the boiled water over the glass. You can add dishwashing liquid or salt into the boiling water.

Let the cheap glass pipes stay in the boiling water for some 30 minutes depending on how dirty the pipes are. To scrub the softened resin from the glass pipes, you can use the paper towel. You can then continue to wipe the resin for a long time until the surface is cleaned and then rinse it.

Rubbing alcohol is also one of the best methods to clean cheap glass pipes. If you feel that the cheap glass pipes will break down when you scrub it, you can shift to the rubbing alcohol and clear up all the sticky resins from the pipe. You can choose to work with alcohol alone or with an abrasion. Put a lot of alcohol that is enough to cover the pipe in a bag. You can add some salt to the alcohol and shake it for some minutes.

If it is possible to put the salt inside the cheap glass pipe and close the mouth with your fingers, it will be the best. You then shake the salt inside the pipe to ensure that its abrasive nature will remove all the tar and resin. You can then let the pipe to soak in alcohol and slat for a long time. You can the shake again and rinse the pipe thoroughly.