3 Tips from Someone With Experience
Guide On How You Can Get Your Device Back To Operation
Nothing is annoying like turning on the device only to find a black screen. When it’s not a major error there are some steps that you can follow to get the device back to operation. Following are these steps that will help you use the device again without errors.
When you turn the device on and find a black screen at time it may due to lack of power. If you have been charging the device but still no changes you can check the power system whether its operation. Most of the instances you will find that it’s the power cable which is faulty hence not charging the device. To test this you can use another power cable to charge the device. Apart from that you can check the USB ports to ensure that they do not have any particle which affects the charging system. Use specified cleaning material for wiping out the dust particles from the USB port.
At times a frozen device will not respond when you turn on the device. Note that even when the device is turned off it can still freeze meaning that it will not respond when you turn it on. Removing the battery for some time and then you return it back will always fix this problem if not that you can seek this service. Some devices have a built-in battery which means that you cannot remove the battery instead press the power battery for some time to soft reboot the device.
The other instance which may cause the black screen is a faulty battery. If you have been overcharging the battery for some time or have been using the device at the same time it’s charging this could damage the battery. At times the battery may be drained which means that you have to allow some time to charge before you turn the device on. If the device does not turn on after connecting it to power for some time then the battery could be faulty.
At times you may find that it’s the screen that is not responding. You can know of this when you are able to turn on the device but the screen does not respond. Reboot the device to see whether the situation with the screen will change if not you can seek this service.
The last option is to factory or data reset the device. This means that you erase all that was saved on the device to its original state. This is done by holding the power button and volume button at the same time until you get recovery and boot options.